|
The tablesaw makes a nice flat surface and the rip fence keeps the edges aligned for placing the initial tape across the joints ... |
|
Flip the box on edge and 'roll it up' ..... place the back or bottom in ... |
|
Finally ..... tape the last corner closed and you will be all set ... |
|
From here you can use bandclamps, rubber bands or whatever ......
the miters should stay nice and tight and aligned from the tape. Enjoy Knipfer 
 This site is maintained by: Good-Lyddon Data Systems Copyright © 2004-2005 Joe Lyddon, WoodWorkStuff.net |